Gucai3d PLA+ Filaments:
Gucai3d PLA+ filament for 3D printer, is a Polylactic Acid (PLA) is one of the most widely used materials for 3D printing. extracted and purified from corn grain , Biodegradable, environmentally friendly material, special addition add to make PLA melting lower, bright, Lower viscosity, easy to remove support. It’s molecular weight is uniform distributed. making the molecules in the material more compatible, stable diameter accuracy and printing effect. Good toughness, not easy to break, 10 times the toughness of ordinary PLA.
Description:
Green
Environmental protection, non-toxic, biodegradable
Flexural modulus is 10 times than ordinary PLA
Higher toughness and not easy to break
High machine compatibility, high matching with printers
Smoother printing and firmer finished products
Filament data:
| Printing temperature | 195-220℃ |
| Printing bed temperature | 25-70℃ |
| Melting point | 175℃ |
| Heat distortion temperature | 60℃ |
| Melt Index | 5-7g/10min (190℃， 2.16kg) |
| Pull (KGF) | ≥60Mpa |
| Elongation at break | ≥3.0% |
| Density | 1.25±0.05g/cm³ |
| Water absorption | 0.5% |
| Diameters | 1.75mm |
| Net Weight | 1kg |
| Tolerance | ±0.02mm |
Reviews
There are no reviews yet.