Gucai3d PC Filaments:
Polycarbonate filament (PC) is a very hard and corrosion-resistant thermoplastic. It has high impact resistance and good flame retardancy. It greatly supports contact with oil, grease and solvents. It has small deformation and can withstand about No deformation at a temperature of 100°C. It also has good transparency, is considered a good electrical insulator, and can be well exposed to weathering and sunlight.
Description:
Gray
high transparency
Non-toxic and environmentally friendly
High deformation temperature and high thermal stability
Low flammability
Good ductility and easy processing
Filament data:
| Printing temperature | 255-270℃ |
| Printing bed temperature | 80-90℃ |
| Printing speed | 30-50mm/s |
| Tensile strength at yield | 57 MPa |
| Bending strength | 90 MPa |
| Tensile strength at break | 47 MPa |
| Density | 1.25 g/cm³ |
| Tensile strain at break | 15% |
| Impact strength | 15 KJ/㎡ |
| Diameters | 1.75mm/3mm |
| Net Weight | 1kg |
| Tolerance | ±0.02mm |
Reviews
There are no reviews yet.